Product specifications

Terminal Operation
4-47
4.15.6 Controller Unique Identifier
Figure 4 - 80: View and Edit Configuration Parameters
Enter any hex number between “0” and “FFFFF” for the unique identifier.
The value you enter MUST be different for each controller.
Enter a unique ID for every RAID subsystem whether it is configured in a
single-controller configuration. The unique ID is necessary for the
following:
1. MAC addresses for the controller’s Ethernet port that will be taken
over by a surviving controller in the event of single RAID controller
failure.
The unique identifier setting can be accessed from "View and Edit
Configuration Parameters" -> "Controller Parameters" -> "Controller
Unique ID."
4.15.7 Set Controller Date and Time
This sub-menu only appears when the controller is equipped with a real-
time clock.