Instruction Manual

20
English
Statistics
Your stimulator includes a statistics menu
that allows you to view in real time the
important information for a programme.
To access the statistics screen, you must
put the stimulator into the “Pause” mode or
wait for the end of the programme.
Fig. 9 For programmes inducing muscular
contractions, the indication “MAX” shows
the maximum energy level reached per
channel during contraction phases. “AVG”
indicates the average stimulation energy
level used by the dierent channels during
the contraction phase.
Fig. 10 In low frequency programmes, the
m i-RANGE function, symbolised by a single
square bracket shows what percentage of
stimulation time was spent in the optimal
energy range.
9e-10e Press the channel 4 +/- button to
resume the programme at the point where
it was interrupted.
End of programme
At the end of each session, a small ag will
be displayed on the screen and a short
melody will be played. To switch o the
stimulator, press the On/O button.
Depending on the programmes, usage
statistics may be displayed (cf. g. 9 and 10).
It should be noted, however, that statistics
are not available for all programmes.