Specifications

44
How to Setup 802.1x
802.1x
1. Key in the IP address of the
Primary RADIUS Server in you
r
WLAN.
Optional: You may also key in a
Secondary RADIUS Server, if
any.
Note: The RADIUS server MUST
be
in the same subnet as the access
point.
2. The Authentication Port is preset
as 1812, but another port
number can be used.
Note: The Authentication Port
MUST
match the corresponding
port of the RADIUS server.
3. Enter the Shared Secret Key,
known only to you and the
RADIUS server.
4. The Accounting Port is preset as
1813, but another port numbe
r
can be used.
5. You can opt for a Key Length
of
either 64 bits (10 hex / 5 ASCII
values) or 128 bits
(26 hex / 13
ASCII values).
6. Click on Apply.
7. Click on Reboot to restart the
system, after which the settings
will be effective.
1