Specifications

30
Operation Mode : These operation modes are supported:
• Access Point
• Client Mode
• Wireless Routing Client
• Transparent Client Mode
WLAN name (ESSID) : Enter a preferred name for the wireless network.
Your wireless clients must be configured with the same ESSID
(sometimes referred to as SSID).
To change the wireless mode,
make a selection from the drop-
down box.
The access point supports wireless
LAN connectivity that is fully
compliant with the IEEE 802.11g,
IEEE 802.11a, and IEEE 802.11b
standards.
It also employs different security
modes to secure the data
transmission of the wireless clients
within your network.
The Current Mode
is defaulted to
Access Point.
To change the mode, click on the
3
4