Specifications

17
Option 2: Using PoE to Supply Power
PoE (Power-Over-Ethernet) can be used to power the access point. This
accessory supplies operational power to the wireless access point
through the Ethernet cable connection and is available separately.
If you wish to use PoE to supply power to the access point, follow the
steps below:
Follow the steps described in Option One.
Connect one end of an RJ45 Ethernet cable to LAN OUT port of the
PoE Injector and the other end to Port 4 of the access point.
For PoE, the recommended length of the RJ45 Category 5 cable is up
to 50 metres.