Specifications

15
Chapter 3: Hardware Setup
The access point can be powered using either the power adapter, or
PoE
*
or IEEE 802.3af PoE.
The installation process for the three options is described below.
Option 1: Using Power Adapter to Supply Power
Before attaching a pair of
external antennas to the access
point, take note of the ‘A’
marking on one of the two
antennas.
The antenna with the ‘A’ marking
is the Dualband AG Antenna.
The antenna without the marking
is the single-band G Antenna.
• PoE is available in several models and power outputs.
Please contact your supplier for the correct model and power requirements.
Connect the single-
band G antenna to
Ant-2 on the RIGHT.
Connect the Dualband
AG antenna to Ant-1 on
the LEFT.
‘A’ marking
!
Important: To ensure proper functionality of the access
point, these two antennas MUST NOT be
swapped.