Specifications

167
2. I am unable to surf the Internet.
A. Make sure that the Ethernet cable is properly connecting your
Cable/ADSL modem to the WAN port of the access point, and
verify whether the access point has a valid IP address from the
About System page. Then refer to suggested steps A, B & C to
Problem 1 as described above, to verify the connectivity of the
gateway.
B. Ensure that the WAN settings suit your broadband connection.
In case of doubt, you should contact your network administrator
/ ISP to enquire about your Internet connection type.
C. Power off your computer, the access point and the Cable/ADSL
modem. Turn on the Cable/ADSL modem then wait for 1 minute
before turning on the access point. Lastly, turn on your
computer. Verify whether you have been allocated an IP
address and are able to surf the web.
3. I am a PPPoE and am not able to access Internet
A. Refer to Problem 1 follow the suggested steps described to
verify your connectivity to the access point.
B. If you are a PPPoE user, you will need to remove the proxy
settings or the dial-up pop-up window.
C. Open your web browser.
♦ For Microsoft Internet Explorer 5.0 or later versions
 From the Tools menu bar, select Internet Options and
then click on the Connections tab. Click on the LAN
Settings button. Uncheck any options from that dialog
box. Press the OK button to return to the previous screen.
 Click the radio box option Never dial a connection to
remove any dial-up pop-ups. Press the OK button to
finish.