Specifications

165
How it works
1. The connection path when WPC-1 is connected to VAP-WLAN1
flows from AP to the Ethernet port of the access point to switch
VLAN ID segment 10, WPC-2 flows to VLAN ID segment 20, and
WPC-3 flows to WLAN ID segment 30.
2. Both WPCs and PCs can share Internet access through the WRC
connection.
3. A VAP connection only for Internet access can also be added.
It is recommended that the VAP is setup with a VLAN ID that does
not belong to any VLAN group. This is so that wireless PCs
connected to this VAP will not be able to detect other wireless PCs
from different VAP connections.
By enabling “Station Isolation” for this radio, the wireless clients are
further isolated from each other, providing even higher security.
Note: VAPs setup for the station isolation enabled card will take
effect immediately.
4. Each individual VLAN group at the switch can also serve Internet
sharing connection for the wireless clients by connecting a router to
the switch.