Specifications

138
TELNET CLI
Telnet CLI (Command Line Interface)
The user may connect to the CLI (Command Line Interface) via a
TELNET session to the default IP, 192.168.168.1. This section uses Microsoft
TELNET command for instruction. You may use any TELNET client.
Connecting to CLI (Command Line Interface) via TELNET
1. Connect to CLI (Command Line Interface) with the following
command at DOS prompt. The TELNET application will then be launched and
connected.
C:\WINDOWS\TELNET 192.168.168.1
2. At the login prompt, type in “password” (default password) and press
the <ENTER> key, as shown in Figure 2.4c. You will then login to the CLI.