Specifications

108
DMZ
1. Click NAT from the
CONFIGURATION menu.
2. Ensure that NAT Status is set
to Enable.
At the Advanced NAT Options
section:
3. Click DMZ.
1
1. In the Private IP Address field,
enter the IP address of the PC
you wish to place within the DMZ.
Private IP Address is set to 0.0.0.0
by default.
2. Click Apply.
2
To disable DMZ:
1. In Private IP Address
field enter 0.0.0.0.
2. Click Apply.
3
!
NOTE:
1. The Static IP Address configuration is
recommended for the DMZ host when DMZ is
enabled, as the address may change if allocated
by DHCP, causing improper functioning of the
DMZ.
2. The DMZ host is not invulnerable to malicious
attacks from the Internet as DMZ exposes ALL of
the host’s ports.