Specifications

105
Link Speed & Duplex
The access point supports connection link speeds of 100Mbps at full duplex and
10Mbps at half duplex, and can also automatically detect the correct setting.
Auto MDIX (Medium Dependent Interface Crossover) feature
automatically detects whether a straight-thru or crossover cable is
being used.
Follow these steps to set link speed and duplex, and set whether to enable or
disable Auto MDIX.
Link Speed and Duplex
Select WAN Setup from Configuration
menu.
Select Link Speed & Duplex from Advanced
WAN Options.
Select whether to Enable or Disable
Auto MDIX.
Select Link Speed & Duplex.
Click Apply to apply changes or Back
to return to WAN Setup page.
1
2
3