Specifications

98
PPPoE
Select this connection type if you have subscribed to ADSL in a country
utilising standard PPPoE for authentication, for instance:
 If you are in Germany, which uses T-1 connection.
 If you are a SingNet Broadband or Pacific Internet Broadband user
in Singapore.
These are the parameters in the PPPoE setup.
PPPoE Parameter Description
Username
This refers to your broadband account username.
Password
This refers to your broadband account password.
On-Demand
If enabled, the access point will automatically connect to
the ISP whenever a LAN client makes an Internet request.
Idle Timeout
This field is relevant only if On-Demand is enabled.
It allows you to specify an idle time allowed before the
access point automatically goes offline.
It will only reconnect when a LAN client makes an Internet
request.
If the field is set to 0, this feature will be disabled, and the
access point will remain online unless disconnected by
the ISP.
The default value is preset to 30 seconds.
Always-On
If this feature is enabled, the access point will remain
permanently connected to the Internet.
Reconnect Time
Factor
This field is relevant only if Always-On is enabled and
allows you to specify an offline time allowed, before the
access point automatically reconnects to the Internet.
The default value is preset to 30 seconds.