Specifications

5
Chapter 1: Introduction
Introducing the access point
His access point is a Wireless 54Mbps A+G Dualband Access
Point. It doesn’t just operate in wired network environments, it
also upholds simultaneous IEEE802.11a and IEEE802.11b/g
connections, as is often required in hotspots and other public
Internet access deployment.
The access point is designed to support state-
of-the-art security standards such as the Wi-Fi
Protected Access (WPA) protocol, the 802.1x
authentication standard, 64/128-bits Wired
Equivalent Privacy (WEP) encryption, and
Transparent Client mode, which is specifically
developed to be paired with root access
point for Point-to-Point and Point-to-MultiPoint
connection.
This high-
performance
access point also
bears the
exclusive uConfig
utility and broadband Internet sharing
support is an additional function that can
be enabled.
When the user chooses to enable routing,
additional enhanced functions to the
wireless access point operation are
available, such as Load Balancing; Fail-Over
Redundancy; Parallel Broadband; built-in DHCP server; Virtual Servers
based on IP and Port Forwarding; De-Militarised Zone hosts; Packet
Filtering; and much more!
T
Advanced Features

 New 54Mbps 802.11a
& 802.11g 5X faster
than 802.11b!
 Secure your wireless
data transmissions
with WPA protocol,
IEEE 802.1x
authentication and
64/128-bits WEP
Encryption!
Read on and find out more
about these features!
 Quickly access your
network device’s web
administration setup with
uConfig!
 Have you heard of
Parallel Broadband
?
Continue reading to
discover how the ultimate
Internet solution is
delivered!