Specifications

Page 18
Steady
Red
Wireless interface up and running.
Ready for operation.
4 WLAN LED
Flashing
Red
Activity is detected in the wireless network.
5 WAN Conn
LED
Flashing
Red
Data transmission at WAN connection.
6 DIAG LED Flashing
Red
It indicates that the firmware is corrupted.
7 LAN Connection for computer with NIC (Network Interface
Card) or Ethernet network card.
Device is power up with PoE on this LAN port.
8 SURGE
ARRESTOR
Connect to a ground wire.
10 RESET
BUTTON
To reboot, press once.
To reset password, press and hold the button for 5
seconds before releasing it.
To restore the factory default settings, press and hold the
button for 8 seconds before releasing it.