Install guide

3
!
Important: To ensure proper functionality of the
access point, these two antennas MUST
NOT be swapped.
2: Hardware Setup
The access point can be powered using either the power adapter, or the PoE
*
or IEEE 802.3af PoE.
The installation process for the three options is described below.
Option 1: Using Power Adapter to Supply Power
Before attaching a pair of external
antennas to the access point, take
note of the ‘A’ marking on one of
the two antennas.
The antenna with the ‘A’ marking is
the Dualband AG Antenna.
The antenna without the marking is
the single-band G Antenna.
• PoE is available in several models and power outputs.
Please contact your supplier for the correct model and power requirements.
Connect the Dualband
AG antenna to Ant-1 on
the LEFT.
Connect the single-band
G antenna to Ant-2 on
the RIGHT.
‘A’ marking