Specifications

Hardware Installation

Step 2:

Use an RJ45 Ethernet cable to connect one end of the cable to the Ethernet

socket of the Injector and the other end to one of the LAN ports of the access

point.

Note:

When one port is used for PoE, the other port cannot connect to any other

network device.

Maximum length of the RJ45 Category 5 cable is 100 metres.

Step 3:

Next, connect the RJ45 Ethernet cable attached to the standard PoE Injector

to your PC’s Ethernet network adapter.

Once you have finished configuring your access point, you can connect the

PoE Injector’s RJ45 Ethernet cable to your network device, such as to a switch

or hub.