Specifications

Page 23
Setup Requirements
• CAT5/5e Networking Cable.
• At least 1 computer installed with a web browser and a wired or
wireless network interface adapter.
• All network nodes installed with TCP/IP and properly configured
IP address parameters.
Setting Up
You can install your access point on a pole. The mounting method will
be described as shown below.
Note the following guidelines for choosing the best location for your
wireless AP:
• Place the AP as close as possible to the area where users will
require access to the WLAN.
• Choose an elevated location where trees, buildings and large
steel structures will not obstruct the antenna signals and which
offers maximum line-of-sight propagation with the users.
• Select an appropriate antenna to improve range and/or
coverage and the access point also lets you fine-tune
parameters such as the transmit power to achieve the best
results.