Specifications

Page 19

Panel Views and Description

Features Status and Indications

Steady Power is supplied to the device.

1 POWER

LED

Off No power is supplied to the device.

2 RESERVED

Reserved for further use.

3 WAN Conn

LED

Flashing Data transmission at WAN connection.

Steady Wireless interface up rready for operation.

4 WLAN LED

Flashing Activity is detected in the wireless network.

5 DIAG LED

Flashing It indicates that the firmware is corrupted.

Steady The respective port has successfully connected

to the access point.

Blinking The respective port istransmitting or receiving data.

6 LAN Link

LED

Off No connection is established.

LAN PORT

Ethernet and power input (PoE) connection

SURGE

ARRESTOR

Connect to a ground wire.

RESET

BUTTON

• To reboot, press once.

• To reset password, press and hold the

button for 5 seconds before releasing it.

• To restore the factory default settings,

press and hold the button for 8 seconds

before releasing it.