Specifications

Page 152
Use Ping Watchdog
This function let you monitor the client connection with AP using ping test.
When client failed to get a ping respond from AP it will forced the client to
reboot.
When device is just startup, there will be a delay of 1 minute before it start the ping
monitor operation.
IP address : destination IP address xxx.xxx.xxx.xxx to monitor.
Ping Interval : Wait time (in second) before it run 1 ping test.
Startup Delay : Minimum 60 seconds default. Enter 60 and above to increase delay.
Failure Count To Reboot: Number of consecutive ping failures before initiate reboot.
Example,
If Ping Interval is 20 sec and Failure Count is 5, then time to reboot after 5
consecutive failures is 5 x 20 sec = 100 sec before it initiate a reboot.