User`s manual

Compex LinkPort PCMCIA Ethernet Card
Chapter 2
Installing the Adapter
This chapter describes the procedure for installing the
Compex LinkPort PCMCIA Ethernet Card.
Procedure:
1.
Power OFF the host computer.
2. Insert the Compex LinkPort PCMCIA
Ethernet Card into the computer’s PCMCIA
slot.
Insert the 68-pin connector on the card into the
computer’s PCMCIA slot. The label on the
card should face up. Slide the card all the way
into the slot.
3.
Plug the media coupler into the card’s 15-pin
connector.
4.
Connect the media coupler to the network.
p Using UTP cable or
p Using BNC cable
p Using UTP (10Base-T) cable:
Plug the free end of the UTP cable into a RJ-45
mating connector on a twisted-pair hub, or into a
network access port.