Specifications

Chapter 4 Wireless LAN Option
84
6. Press the Add button to begin adding members into the Per Group Pseudo
VLAN, as shown in Figure 4.4e. The Per Group Pseudo VLAN
membership is defined based on the MAC address.
Figure 4.4e Configuring Compex NetPassage 16A In Client Mode
7. Select the Per Group Pseudo VLAN that you wish to add a member to by
selecting from the GroupID drop down menu. Enter the MAC address of
the wireless client that you wish to add to this Per Group Pseudo VLAN,
with the format as xx-xx-xx-xx-xx-xx. Press the Apply button to add this
MAC address into the Per Group Pseudo VLAN.
8. Repeat Step 7 & 8 until all the wireless clients have been added to their
respective Per Group Pseudo VLAN.
9. Press the Apply button followed by the Reboot button to complete the
process.
After Compex NetPassage 16A restarts, the Per Group Wireless Pseudo
VLANs have been implemented based on the membership you have defined.
Per Group Wireless Pseudo VLAN supports different WEP private encryption
key for different Pseudo VLAN. If you wish to define WEP private
encryption, please go to Section 4.4.4 titled Defining WEP Private
Encryption.