Specifications
Chapter 4 Wireless LAN Option
83
To implement Per Group Wireless Pseudo VLAN:
1. Click on the WLAN Setup from the Command Menu and the Wireless
LAN operating mode setup window will be displayed, as shown in Figure
4.4a.
2. Press the Apply button and the access point configuration window will be
displayed, as shown in Figure 4.4b.
3. Expand the Pseudo VLAN drop down menu and select Per Group.
4. Press the Apply button and the Per Group Pseudo VLAN membership
definition window will be displayed, as shown in Figure 4.4d.
Figure 4.4d Defining Per Group VLAN Membership
5. Compex NetPassage 16A supports up to 4 Per Group Pseudo VLANs.
“Check” the VLAN Group box which Pseudo VLAN you wish to
implement. For example, if you wish to implement two Per Group Pseudo
VLAN, you may “check” the boxes on Group1 and Group 2.