Specifications

Chapter 4 Wireless LAN Option
81
4. Press the Apply button and the access point client configuration window
will then be displayed, as shown in Figure 4.4c.
Figure 4.4c Configuring Compex NetPassage 16A In Client Mode
5. Enter the parameters into the respective fields:
Station Name
Enter a preferred name for your Access Point Client.
SSID
Enter the SSID of the wireless access point that you
wish this access point client to access to.
Tx Rate
Select a transmission rate from the drop down menu.
PS Mode
Disable/Enable the power saving mode.
RTS Threshold
Compex NetPassage 16A uses CSMA/CA method to
transmit short data packets but uses RTS/CTS
mechanism to transmit long data packets. Packet size
smaller than RTS Threshold is considered short
packet whereas larger or equal to RTS Threshold is
considered long packet. Do not modify the default
value if you are not sure what to do.