Specifications

Chapter 3 Configuring Compex NetPassage 16A
72
3.14.4 Profile Saving, Restore & Reset to Defaults
You may save the configuration profile of your Compex NetPassage 16A onto
the hard disk of your managing computer and restore this profile in a later
time. You may also reset the configuration of your Compex NetPassage 16A
to factory defaults.
1. Click on the Save or Reset Settings from the Command Menu and the
following page will be displayed as shown below.
Figure 3.14d Saving, Restore and Reset Profile
2. Press the Save button if you wish to save the configuration profile into
Compex NetPassage 16A’s flash ROM. Press the Backup button if you
want to save the configuration profile onto the hard disk. If you want to
restore a profile, press the Browse button to select the file from the hard
disk and press the Restore button. If you wish to reset your Compex
NetPassage 16A back to factory defaults, press the Clear and Reset
button.
CAUTION
Pressing the Clear and Reset button will discard all the
configuration you have saved to Compex NetPassage 16A’s flash
ROM.