Specifications

Chapter 3 Configuring Compex NetPassage 16A
66
5. Press the Apply button to add this filtering function into the list.
6. Ensure that the Sent radio button is “checked”.
7. Press the Apply button for the changes to be effective.
3.12.2 Internet Application Filtering
To define a function to perform Internet Application Filtering:
1. Press the Add button at the filtering configuration page as shown in
Figure 3.12a.
2. To define a rule to perform Internet Application Filtering, you need to
know the TCP port of the application of which this rule applies. For
example, if you wish to stop the computers from connecting to the Internet
via a TELNET (uses TCP Port 23) session, you may define a rule with the
following parameters:
Rule Name Enter your preferred name for this rule
IP Address Select Any from the drop down menu
(From) <blank>
(To) <blank>
Destination Port Select Single from the drop down menu
(From) 23
(To) <blank>
Day of the Week Any
(From) Sun
(To) Sun
Time of the day Select Any from the drop down menu
(From) <blank>
(To) <blank>
3. Press the Apply button to add this filtering function into the list.
4. Ensure that the Sent radio button is “checked”.
5. Press the Apply button for the changes to be effective.