Specifications

Chapter 3 Configuring Compex NetPassage 16A
54
2. To define a new static routing entry into the routing table, press the Add
button. The following page will be displayed, as shown in Figure 3.6c.
Figure 3.6c Adding New Static Routing Entry into the Routing Table
3. Enter the destination network address into the Destination IP Address
field and the IP address of the gateway connected to this network into the
Gateway IP Address field. For example if a gateway of IP
192.168.168.254 is connected to a remote network 192.168.100.0, enter
the Destination IP Address and Gateway IP Address as 192.168.100.0
and 192.168.168.254 respectively.
4. Press the Apply button to add the new static routing entry into Compex
NetPassage 16A’s routing table.
3.6.2 Dynamic Routing
To enable dynamic routing protocol:
1. Click to expand the Dynamic Routing drop down menu and select the
preferred dynamic routing protocol, RIP1 or RIP2. (Figure 3.6b)
2. Press the Apply button for the changes to be effective.