Specifications

Chapter 3 Configuring Compex NetPassage 16A
48
7. Press the Save or Reset Settings from the Command Menu and press the
Save button.
3.3.4 Defining Virtual Server based on IP Forwarding
If you have configured your Compex NetPassage 16A with Static IP WAN
type, you have the option to define Virtual Server based on IP Forwarding.
1. Click on the NAT from the Command Menu and the NAT configuration
page will be displayed as shown below.
Figure 3.3g NAT Configuration Window for Static IP WAN Type
2. Press the Static Ip Address Entries button and the list of defined Virtual
Server will be displayed, as shown in Figure 3.3h.
Figure 3.3h Table Showing Defined Virtual Server based on IP Forwarding
3. Press the Add button to define new Virtual Server as shown.