Specifications

Chapter 3 Configuring Compex NetPassage 16A
47
3.3.3 Defining Virtual Server based on Port Forwarding
To define Virtual Server based on Port Forwarding:
1. Click on the NAT from the Command Menu and the NAT configuration
page will be displayed, as shown in Figure 3.3c.
2. Press the Port Forwarding button and the list of defined Virtual Server
will be displayed, as shown in Figure 3.3e.
Figure 3.3e Table Showing Defined Virtual Server based on Port Forwarding
3. Press the Add button to define new Virtual Server as shown below.
Figure 3.3f Defining New Virtual Server based on Port Forwarding
4. For Known Server, select the Server Type from the drop down menu and
specify the private IP address of your Virtual Server.
5. For Custom Server, specify the IP address of the Virtual Server, select
the Protocol used by this application from the drop down menu, specify
the TCP/UDP port used by this application, and enter your preferred
reference name in the Server Type field.
6. Press the Add button to add this new Virtual Server into the list.