Specifications

Chapter 3 Configuring Compex NetPassage 16A
35
3. Check the Static IP Address radio button and press the Save button. The
following Static IP Configuration page will then be displayed.
Figure 3.2f Static IP Configuration Page
4. Enter the IP Address, the Network Mask and the ISP’s Gateway IP
Address into the fields. These information is provided by your ISP. Press
the Save button followed by the Reboot button to complete the
configuration process.
3.2.3 ADSL Internet using PPP over Ethernet (PPPoE)
If you have subscribed to ADSL Internet service using standard PPP over
Ethernet (PPPoE) for authentication, you need to configure your Compex
NetPassage 16A to support PPPoE.
1. Click on the WAN Setup from the Command Menu and the WAN
configuration page will be displayed, as shown in Figure 3.2a.
2. Press the Change button and the list of supported WAN type will be
displayed.
Figure 3.2g WAN Type – PPP over Ethernet