Specifications

Chapter 3 Configuring Compex NetPassage 16A
32
NOTE
Figure 3.2a shows a WAN interface configured with static IP. If your
Compex NetPassage 16A has previously configured with PPPoE or
other WAN type, this page will show the respective configuration
page.
2. Press the Change button and the list of supported WAN type will be
displayed, as shown in Figure 3.2b.
Figure 3.2b WAN Type - Dynamic IP Address
3. Check the Dynamic IP Address radio button and press the Save button.
4. Press the Reboot button to restart Compex NetPassage 16A.