Specifications

Chapter 2 Getting Started
15
The program will automatically display the IP address of the device found.
Figure 2.3a Npfind discovered Compex Product
Contact your area of support for help if needed, or write to us at
[e-mail].
2.4 Alternative Approach to connect to the Configuration Interface
Compex NetPassage 16A is integrated with an embedded HTTP Server to provide a
user-friendly web-based configuration interface. Alternatively, you may also connect to
the Command Console of Compex NetPassage 16A via a TELNET session or a direct
serial connection.
This section assumes that the IP address of your Compex NetPassage 16A has not been
changed. It is still the default IP of 192.168.168.1.
This section also assumes that the TCP/IP settings of your computer have been
configured properly. To make sure that the TCP/IP of your computer has been
configured properly, perform the following command at the DOS prompt:
C:\WINDOWS\PING 192.168.168.1
If you receive replies from the above command, it indicates that your computer has been
properly configured with TCP/IP, else please proceed to Section 2.5 to set up your
TCP/IP for your computer.