User guide

160
EN
Compex Fit - User Manual
Stimulation is not producing the usual sensation
• Check that all the settings are correct and ensure the electrodes are positioned
properly.
• Change the positioning of the electrodes slightly.
The stimulation effect causes discomfort
• The electrodes are beginning to lose adhesion and no longer provide good contact
on the skin.
• The electrodes are worn and need to be replaced.
• Change the positioning of the electrodes slightly.
The stimulator is not working
• If an error screen appears while the equipment is in use, note the error number (in
the example error 1/0/0) and contact the consumer service listed and approved by
Compex.