Specifications

Symptom Action
The system does not respond when the
password is entered.
Go to “Step 1020-2” on page 47.
The system stopped. A POST indicator is
displayed on the system console and an
eight-digit error code is not displayed.
If the POST indicator represents:
v Memory, go to “MAP 1540: Minimum
Configuration” on page 52.
v Keyboard
1. Replace the keyboard cable.
2. Replace the keyboard.
3. Go to “MAP 1540: Minimum
Configuration” on page 52.
v Network, go to “MAP 1540: Minimum
Configuration” on page 52.
v SCSI, go to “MAP 1540: Minimum
Configuration” on page 52.
v Speaker, go to “MAP 1540: Minimum
Configuration” on page 52.
The system stops with a 4-digit number
displayed in the operator panel display.
If the number displayed begins with the
character ″8″, ″9″, ″A″,or″B″, go to “Service
Processor Checkpoints” on page 79.
If the number displayed is in the range
E1xx-EFFF, go to “Firmware Checkpoints” on
page 85.
For all other numbers, record SRN 101-xxx,
where xxx are the last three digits of the four
digits of the four-digit number displayed in the
operator panel display. Then go to the ″Fast
Path MAP″ in
Diagnostic Information for
Multiple Bus Systems
.
Note: If the operator panel displays two sets of
numbers, use the bottom set of numbers as the
error code.
The System Management Services menu is
displayed.
Go to “Step 1020-4” on page 47.
All other symptoms. If you were directed here from the Entry MAP,
go to “MAP 1540: Minimum Configuration” on
page 52. Otherwise, find the symptom in the
“Entry MAP” on page 37.
46 Service Guide