Specifications

FRU Name Slot
Name
Location
Code
AIX
Location
Code
Physical
Connection
Logical
Connection
DASD 6-Pack 2, Drive 3 D9 B2.3 SCSI:
xx-xx-00-
10,0 SSA:
See Note 4.
DASD 6-Pack 2, Drive 4 D10 B2.4 SCSI:
xx-xx-00-
11,0 SSA:
See Note 4.
DASD 6-Pack 2, Drive 5 D11 B2.5 SCSI:
xx-xx-00-
12,0 SSA:
See Note 4.
DASD 6-Pack 2, Drive 6 D12 B2.6 SCSI:
xx-xx-00-
13,0 SSA:
See Note 4.
2-Pack DASD Drive 1 D13 P1-Z1-A4 11-08-00-4,0 See Note 2.
2-Pack DASD Drive 2 D14 P1-Z1-A2 11-08-00-2,0 See Note 2.
Tape Drive D17 P1-Z1-A0 11-08-00-0,0 See Note 2.
CD-ROM Drive D16 P1-Z1-A1 11-08-00-1,0 See Note 2.
Notes:
1. The physical location code for the PCI slots, when empty, uses the P1/Ix notation,
where the ’/’ identifies an integrated device (in this case the empty slot). A PCI
device plugged into the slot uses the P1-Ix notation, where the ’–’ identifies a
plugged device.
2. 11 is for the integrated SCSI device. -4,0 and -2,0 are hardcoded on the DASD
2-pack; -0,0 is the tape drive; -1,0 is the CD-ROM.
3. xx-xx is dependent on which SCSI controller is driving the 6-pack.
4. Use the link verification utility in the SSA service aids under AIX diagnostics to
identify individual SSA drives.
Specifications
This section contains specifications for the system.
The mechanical packaging, cooling, power supply, and environmental requirements for
the system are as follows:
Dimensions
In horizontal orientation, the dimensions are:
v Height - 610 mm (24.0 inches)
v Width - 483 mm (19.0 inches)
Chapter 1. Reference Information 29