Specifications

Replacement

Note: If your system has a one-way processor card installed, the memory may be

installed on this card. Remove the processor card to upgrade the memory. See

“Removing a Memory Riser Card or One-Way Processor Card” on page 332.

1. With one hand, touch any metal surface of the chassis to minimize static electrical

charges, and then pick up the memory DIMM.

2. Locate the memory DIMM connector on the card, and remove the dummy memory

DIMM from the connector by pushing the tabs out on the memory connector.

Push Locking Tabs

Out to Release Memory

Module

3. Insert the memory DIMM by firmly pressing the DIMM into the connector. Secure

the DIMM into position with the locking tabs on each end of the connector.

Locking Tabs

4. Install the memory riser card in the system unit. See “Installing a Memory Riser

Card or a One-Way Processor Card” on page 333 for more information.

338 Service Guide