Specifications

5. The card is secured in place with camming latches at each end. Open the card
latches by rotating them out until the card is pulled out of the connector on the
system board.
Attention: To prevent damage to the card and to the card connectors, open both
of the latches at the same time. You must install either a memory riser card or a
blank memory card in each memory card slot. Do not operate the system if any of
the memory riser card slots are empty.
Installing a Memory Riser Card or a One-Way Processor Card
1. Open the camming latches.
Chapter 9. Removal and Replacement Procedures 333