Specifications

3. If you have not already done so, remove the front, rear, and right side covers as
described in “Removing the Covers” on page 301.
4. Locate the next available fan position.
5. Pull the locking knob on the fan bay blank cover and remove it by pulling it straight
out from the system unit.
2
1
1 Fan bay blank cover 4
2 Fan bay blank cover 2
6. Install the new fan by pulling the locking knob out and then inserting the tabs on the
left side of the fan into the frame opening.
7. Swing the right side of the fan inward until the locking knob contacts the frame.
8. Push the locking knob until you feel it lock into position.
9. Go to “Installing a Redundant Power Supply” to install the redundant power supply.
Installing a Redundant Power Supply
Attention: You must remove the power supply baffle plate before you install and
operate a new power supply in the top position.
330 Service Guide