Specifications

Covers
Removing the Covers
To remove the covers, perform the following steps:
1. Some procedures can be performed while the system power is on. Refer to
“Hot-Pluggable Options” on page 306 to determine if the device you are installing is
hot-pluggable.
If the option you are installing is:
v A hot-pluggable device, proceed to the next step.
v Not a hot-pluggable device, then shut down the system as described in “Stopping
the System Unit” on page 306.
2. To remove the front cover, grasp the cover at the top and pull out the top far
enough to clear the front of the system.
3. Lift up the front cover to disengage the tabs on the bottom.
Chapter 9. Removal and Replacement Procedures 301