Specifications
Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
450E 288D Memory system and scan control
routines detected memory riser fault
1. If more than one DIMM is called
out, go to the service processor
Memory
Configuration/Deconfiguration
Menu to verify memory DIMMs
state. See ″Memory
Configuration/Deconfiguration
Menu″ on page 260 for more
information.
2. Memory riser card, Location:
P1-M1 or P1-M2
450E 2A00 Memory system and scan control
routines detected 6W 4M 500 MHz
processor fault
Processor card, Location: P1-C1
450E 300A Memory system and scan control
routines detected 32MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450E 300B Memory system and scan control
routines detected 128MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450E 300C Memory system and scan control
routines detected 256MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450E 300D Memory system and scan control
routines detected 512MB (stacked)
DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450E 300E Memory system and scan control
routines detected 512MB (unstacked)
DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450E 301F Memory system and scan control
routines detected 128MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450E 303A Memory system and scan control
routines detected 1GB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450F 244C Memory system and error code
generation/logging detected 1W 2M
400 MHz processor fault
Processor card, Location: P1-C1
450F 244D Memory system and error code
generation/logging detected 2W 4M
500 MHz processor fault
Processor card, Location: P1-C1
450F 244E Memory system and error code
generation/logging detected 4W 4M
500 MHz processor fault
Processor card, Location: P1-C1
450F 244F Memory system and error code
generation/logging detected 1W 2M
500 MHz processor fault
Processor card, Location: P1-C1
450F 248A Memory system and error code
generation/logging detected operator
panel fault
Operator panel, Location : L1
196 Service Guide