Specifications
Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
450C 281F Memory system and IPL detected
SSA backplane fault
SSA 6-pack, Location: B1 or B2
450C 282E Memory system and IPL detected
system board fault
1. System board, Location: P1
2. Processor card, Location: P1-C1
450C 283F Memory system and IPL detected
SCSI backplane fault
SCSI 6-pack, Location: B1 or B2
450C 288D Memory system and IPL detected
memory riser fault
1. If more than one DIMM is called
out, go to the service processor
Memory
Configuration/Deconfiguration
Menu to verify memory DIMMs
state. See ″Memory
Configuration/Deconfiguration
Menu″ on page 260 for more
information.
2. Memory riser card, Location:
P1-M1 or P1-M2
450C 2A00 Memory system and IPL detected 6W
4M 500 MHz processor fault
Processor card, Location: P1-C1
450C 300A Memory system and IPL detected
32MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450C 300B Memory system and IPL detected
128MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450C 300C Memory system and IPL detected
256MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450C 300D Memory system and IPL detected
512MB (stacked) DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450C 300E Memory system and IPL detected
512MB (unstacked) DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450C 301F Memory system and IPL detected
128MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450C 303A Memory system and IPL detected
1GB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450D 244C Memory system and attention handler
detected 1W 2M 400 MHz processor
fault
Processor card, Location: P1-C1
450D 244D Memory system and attention handler
detected 2W 4M 500 MHz processor
fault
Processor card, Location: P1-C1
450D 244E Memory system and attention handler
detected 4W 4M 500 MHz processor
fault
Processor card, Location: P1-C1
450D 244F Memory system and attention handler
detected 1W 2M 500 MHz processor
fault
Processor card, Location: P1-C1
192 Service Guide