Specifications

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
450A 25BE Memory system and self test
detected 4W 600 MHz processor
fault
Processor card, Location: P1-C1
450A 25BF Memory system and self test
detected 6W 668 MHz processor
fault
Processor card, Location: P1-C1
450A 25CB 1W processor card fault Replace the processor card,
Location: P1-C1
450A 25EA 4W processor card fault Replace the processor card,
Location: P1-C1
450A 25EB 2W processor card fault Replace the processor card,
Location: P1-C1
450A 25F2 6W processor card fault Replace the processor card,
Location: P1-C1
450A 263D Memory system and self test
detected memory filler fault
Memory filler card, Location: P1-M1
or P1-M2
450A 281F Memory system and self test
detected SSA backplane fault
SSA 6-pack, Location: B1 or B2
450A 282E Memory system and self test
detected system board fault
1. System board, Location: P1
2. Processor card, Location: P1-C1
450A 283F Memory system and self test
detected SCSI backplane fault
SCSI 6-pack, Location: B1 or B2
450A 288D Memory system and self test
detected memory riser fault
1. If more than one DIMM is called
out, go to the service processor
Memory
Configuration/Deconfiguration
Menu to verify memory DIMMs
state. See ″Memory
Configuration/Deconfiguration
Menu″ on page 260 for more
information.
2. Memory riser card, Location:
P1-M1 or P1-M2
450A 2A00 Memory system and self test
detected 6W 4M 500 MHz processor
fault
Processor card, Location: P1-C1
450A 300A Memory system and self test
detected 32MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450A 300B Memory system and self test
detected 128MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450A 300C Memory system and self test
detected 256MB DIMM fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
450A 300D Memory system and self test
detected 512MB (stacked) DIMM
fault
Memory DIMM, Location: P1-M1.n or
P1-M2.n or P1-C1-Mn
188 Service Guide