Specifications
Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
406F 0233 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-M1.10
406F 0234 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-M1.8
406F 023D Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-M1.7 x4
406F 02FF Error code generation/logging
detected memory failure on riser card
1 that cannot be automatically
isolated.
Go to “MAP 1540: Minimum
Configuration” on page 52, and run
minimum configuration for further
isolation.
406F 0300 Error code generation/logging
detected processor card fault
Processor card Location: P1-C1
406F 0301 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M8
406F 0302 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M1
406F 030D Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M1
x2
406F 0311 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M7
406F 0312 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M2
406F 031D Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M2
x2
406F 0321 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M6
406F 0322 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M3
406F 032D Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M3
x2
406F 0331 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M5
406F 0332 Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M4
406F 033D Error code generation/logging
detected memory DIMM fault
Memory DIMM Location: P1-C1-M4
x2
406F 03FF Error code generation/logging
detected memory failure on
processor card that cannot be
automatically isolated.
Go to “MAP 1540: Minimum
Configuration” on page 52, and run
minimum configuration for further
isolation.
406F 3101 Error code generation/logging
detected RIO port 0 fault
1. RIO port 0, Location: P1-C1
2. System board, Location: P1
406F 3281 Error code generation/logging
detected RIO port 0 fault
1. RIO port 0, Location: P1-C1
2. System board, Location: P1
Chapter 5. Error Code to FRU Index
177