Specifications
Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
406E 030D Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M1
x2
406E 0311 Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M7
406E 0312 Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M2
406E 031D Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M2
x2
406E 0321 Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M6
406E 0322 Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M3
406E 032D Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M3
x2
406E 0331 Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M5
406E 0332 Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M4
406E 033D Scan control routines detected
memory DIMM fault
Memory DIMM Location: P1-C1-M4
x2
406E 03FF Scan control routines detected
memory failure on processor card
that cannot be automatically isolated.
Go to “MAP 1540: Minimum
Configuration” on page 52, and run
minimum configuration for further
isolation.
406E 3101 Scan control routines detected RIO
port 0 fault
1. RIO port 0, Location: P1-C1
2. System board, Location: P1
406E 3281 Scan control routines detected RIO
port 0 fault
1. RIO port 0, Location: P1-C1
2. System board, Location: P1
406E 3284 Scan control routines detected PCI
controller PHB0 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406E 3285 Scan control routines detected PCI
controller PHB1 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406E 3286 Scan control routines detected PCI
controller PHB2 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406F 0001 Error code generation/logging
detected system board fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406F 0003 Error code generation/logging
detected processor fault
All processors, Location: P1-C1
406F 0009 Error code generation/logging
detected memory fault
Go to “MAP 1540: Minimum
Configuration” on page 52.
406F 00A0 Error code generation/logging
detected service processor firmware
fault
Update system firmware
Chapter 5. Error Code to FRU Index
173