Specifications

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
406C 3101 IPL MOPs detected RIO port 0 fault 1. RIO port 0, Location: P1-C1
2. System board, Location: P1
406C 3281 IPL MOPs detected RIO port 0 fault
1. RIO port 0, Location: P1-C1
2. System board, Location: P1
406C 3284 IPL MOPs detected PCI controller
PHB0 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406C 3285 IPL MOPs detected PCI controller
PHB1 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406C 3286 IPL MOPs detected PCI controller
PHB2 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406D 0001 Attention handler detected system
board fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
406D 0003 Attention handler detected processor
fault
All processors, Location: P1-C1
406D 0009 Attention handler detected memory
fault
Go to “MAP 1540: Minimum
Configuration” on page 52.
406D 00A0 Attention handler detected service
processor firmware fault
Update system firmware
406D 00A1 Attention handler detected system
firmware fault
1. Check for AIX updates
2. Check for system firmware
updates
406D 00A2 Attention handler detected service
processor firmware (PRD) fault
Update system firmware
406D 00A3 Attention handler detected memory
plugging fault
Go to “MAP 1540: Minimum
Configuration” on page 52.
406D 00A4 Attention handler detected application
caused fault
Application software
406D 00A5 Attention handler detected invalid
system configuration
Verify that system components are
supported and properly installed
406D 00A6 Attention handler detected no usable
memory
1. Ensure that memory is properly
installed
2. If more than one DIMM is called
out, go to the service processor
Memory
Configuration/Deconfiguration
Menu to verify memory DIMMs
state. See ″Memory
Configuration/Deconfiguration
Menu″ on page 260 for more
information.
3. Go to “MAP 1540: Minimum
Configuration” on page 52
4. If the problem is not fixed, call
service support.
Chapter 5. Error Code to FRU Index
165