Specifications

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
406A 00B1 Self tests diagnostics detected bus
controller failure
System board, Location: P1
406A 00B7 Self test detected insufficient
hardware resources to continue IPL
This error code appears after the
initial testing by the service processor
firmware on the processors and
memory completed successfully, but
a problem occurred when the
firmware tried to communicate
outside the processor and memory
complex. Suspect a problem with the
backplane, location: P1.
406A 0100 Self tests detected memory riser card
fault
Memory riser card Location: P1-M2
406A 0101 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.15
406A 0102 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.1
406A 0103 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.16
406A 0104 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.2
406A 010D Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.1 x4
406A 0111 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.13
406A 0112 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.3
406A 0113 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.14
406A 0114 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.4
406A 011D Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.3 x4
406A 0121 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.11
406A 0122 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.5
406A 0123 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.12
406A 0124 Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.6
406A 012D Self tests detected memory DIMM
fault
Memory DIMM Location: P1-M2.5 x4
Chapter 5. Error Code to FRU Index
153