Specifications

Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
4067 3281 6xx bus processor runtime
diagnostics detected RIO port 0 fault
1. RIO port 0, Location: P1-C1 C1
2. System board, Location: P1
4067 3284 6xx bus processor runtime
diagnostics detected PCI controller
PHB0 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4067 3285 6xx bus processor runtime
diagnostics detected PCI controller
PHB1 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4067 3286 6xx bus processor runtime
diagnostics detected PCI controller
PHB2 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4068 0002 Other bus processor runtime
diagnostics detected system board
fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4068 0003 Other bus processor runtime
diagnostics detected processor fault
All processors, Location: P1-C1
4068 0009 Other bus processor runtime
diagnostics detected memory fault
Go to “MAP 1540: Minimum
Configuration” on page 52.
4068 00A0 Other bus processor runtime
diagnostics detected service
processor firmware fault
Update system firmware
4068 00A1 Other bus processor runtime
diagnostics detected system firmware
fault
1. Check for AIX updates
2. Check for system firmware
updates
4068 00A2 Other bus processor runtime
diagnostics detected service
processor firmware (PRD) fault
Update system firmware
4068 00A3 Other bus processor runtime
diagnostics detected memory
plugging fault
Go to “MAP 1540: Minimum
Configuration” on page 52.
4068 00A4 Other bus processor runtime
diagnostics detected application
caused fault
Application software
4068 00A5 Other bus processor runtime
diagnostics detected invalid system
configuration
Verify that system components are
supported and properly installed
142 Service Guide