Specifications
Table 7. Service Processor Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
4066 030D Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M1
x2
4066 0311 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M7
4066 0312 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M2
4066 031D Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M2
x2
4066 0321 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M6
4066 0322 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M3
4066 032D Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M3
x2
4066 0331 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M5
4066 0332 Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M4
4066 033D Scan interface basic assurance tests
detected memory DIMM fault
Memory DIMM Location: P1-C1-M4
x2
4066 03FF Scan interface basic assurance tests
detected memory failure on
processor card that cannot be
automatically isolated.
Go to “MAP 1540: Minimum
Configuration” on page 52, and run
minimum configuration for further
isolation.
4066 3101 Scan interface basic assurance tests
detected RIO port 0 fault
1. RIO port 0, Location: P1-C1
2. System board, Location: P1
4066 3281 Scan interface basic assurance tests
detected RIO port 0 fault
1. RIO port 0, Location: P1-C1
2. System board, Location: P1
4066 3284 Scan interface basic assurance tests
detected PCI controller PHB0 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4066 3285 Scan interface basic assurance tests
detected PCI controller PHB1 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4066 3286 Scan interface basic assurance tests
detected PCI controller PHB2 fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4067 0001 6xx bus processor runtime
diagnostics detected system board
fault
Replace the system board. Location:
P1 (See note 3 on page 37.)
4067 0003 6xx bus processor runtime
diagnostics detected processor fault
All processors, Location: P1-C1
4067 0009 6xx bus processor runtime
diagnostics detected memory fault
Go to “MAP 1540: Minimum
Configuration” on page 52.
4067 00A0 6xx bus processor runtime
diagnostics detected service
processor firmware fault
Update system firmware
136 Service Guide