Specifications

Table 6. Firmware Error Codes (continued)
Error Code Description Action/ Possible Failing FRU
2B20 0022 Processor is deconfigured by the
system.
1. Replace the processor card,
Location: P1-C1
2. System board, Location: P1
2B2x xx31 Processor is failing POST Replace the processor card.
Location: P1-C1
2B20 0031 Processor is failing POST or is
manually disabled.
1. If the processor is not enabled,
use the service processor menus
to enable the processor. Then
reboot the system.
2. If the processor is failing POST,
replace the processor card.
Location: P1-C1.
2B20 0042 Unknown processor card Remove the unknown processor
card. Location: P1-C1.
2BA00000 Service processor POST failure Replace the system board. (See note
3 on page 37.) Location: P1
2BA0 0012 Service processor reports self test
failure
Replace the system board. (See note
3 on page 37.) Location: P1
2BA0 0013 Service processor reports bad
NVRAM CRC
If problem persists, replace the
system board. (See note 3 on
page 37.) Location: P1
2BA0 0017 Service processor reports bad or low
battery.
1. Replace the battery.
2. Replace the system board. (See
note 3 on page 37.) Location: P1
2BA0 0041 Service processor VPD is corrupted. Replace the system board. (See note
3 on page 37.) Location: P1
Chapter 5. Error Code to FRU Index
131