Specifications

Table 2. Firmware Checkpoints (continued)
Checkpoint Description Action/ Possible Failing FRU
E1F1 Begin selftest sequence on boot
device(s). Begin SMS.
See the note on page 78.
E1F2 Power-on password prompt. Prompt should be visible on the
system console.
If a console is attached but nothing
is displayed on it, go to the “Entry
MAP” on page 37 with the symptom
″All display problems.″
E1F3 Privileged-access password prompt Prompt should be visible on the
system console.
If a console is attached but nothing
is displayed on it, go to the “Entry
MAP” on page 37 with the symptom
″All display problems.″
E1F5 Build boot device list See the note on page 78.
E1F6 Determine boot device sequence See the note on page 78.
E1F7 No boot image located Follow the repair actions listed for
error code 20EE000B.
E1FB Scan SCSI bus for attached
devices
If a location code is available,
follow the repair actions listed for
error code 21A000XX.
90 Service Guide