Specifications

Table 1. Service Processor Checkpoints (continued)
Checkpoint Description Action/ Possible Failing FRU
A80A Flash erase end See note 1 on page 84
A80B Reserved; not used See note 1 on page 84
A80C Reserved; not used See note 1 on page 84
A80D Reserved; not used See note 1 on page 84
A80E Reserved; not used See note 1 on page 84
A80F Service processor dump done See note 1 on page 84
B00B Firmware delaying to determine if
MOPs error is the result of power
disturbance. After delay, SPCN is
queried for CEC power status.
1. Remove, then reapply power to
the system.
2. Call service support.
B0F5 Delayed power-off sequence has
begun executing
See note 1 on page 84
B0FA Delayed power-off acknowledged See note 1 on page 84
B0FF Power-off requested program
executing
See note 1 on page 84
Chapter 4. Checkpoints
83